1
Automatic Login
You'll be automatically redirected to Midway for authentication when you visit the portal.
2
Authenticate with Midway
Sign in with your Amazon corporate credentials if prompted.
3
Access Granted
Once authenticated, you'll be logged in automatically with your profile.
💡 Tip:
If you're already signed into Midway, login is instant — no extra steps needed. Contact admin if you see "Access Denied".
1
Select Your Station
Type your station name, pick it from the dropdown, then click Fetch Data. Edit Mode must be ACTIVE to make changes.
2
Fill Your Inputs
SYSTEM VALUES (grey) are read-only plan values. Enter your numbers in the green YOUR INPUTS fields for SPR and Block Mix. Untouched fields default to the plan value.
3
Give a Reason When You Change
If you change SPR, a reason is required to save. If you pick "Other", you must type the specific reason. (Block Mix changes don't need a reason.)
4
Block Mix must total 100%
Each combo's Block Mix must add up to 100% before saving. Exception: DSP Van HZ may be 0% or 100%.
5
Save Each Combo
Click Save Combo on each card. DSP Van and IHS have ONE Save Combo button that saves both CH2 (Non HZ + HZ / Non HD + HD) together.
6
Channel Share & CRET
Set these in the Channel Share & CRET box at the bottom. All channels must total 100%. Edit → adjust → Save Channel Share & CRET. A changed value needs a reason.
7
Guardrails & Approval
Amflex/IHS use an SPR ±% guardrail; DSP Van/Bike use the DPPH simulation delta. Within guardrail → standard approval; exceeds → escalated to ZD. You can still save when it exceeds — it just routes for approval.
8
Combos your station doesn't run
For a combo you don't run (e.g. IHS HD / DSP Van HZ), leave all SPR = 0 or choose the reason "Does not have HD/HZ". It saves with no approval needed.
9
Final Save & Close
Once every combo shows ✔ Saved, click "Final Save & Close" to submit.
💡 Remember:
• Edit Mode must be ACTIVE to save.
• Block Mix = 100% (DSP Van HZ = 0% or 100%).
• Channel Share (all channels) must total 100%.
• Changing SPR / Channel Share needs a reason ("Other" needs text).
• Exceeding a guardrail is allowed but goes for ZD approval.
• "Does not have HD/HZ" (or all-zero SPR) → auto-approved, no approval.
• Don't close until you click Final Save & Close.